Filter
Top Products
To display the current CPU speed,
type ES P EED
only and
press
Enter.
You see the following:
<+>
: Speed Up
20.0 MHz <->
: Speed Down
<Esc> : Exit
To change the speed when you see this display, press the +
or - key; then press
Esc
to exit.
The processor speed you set remains in effect until you
change it using the ESPEED program again, a keyboard
command, or the SETUP program; or until you press the
RESET
button or turn off the computer.
Entering the ESPEED command In a batch file
You may want to run the ESPEED program by including the
command in a batch file. For example, if you have a program
called SLOWDOWN which requires a slower processor speed,
you could include the following commands in a batch file to
start the SLOWDOWN program:
ESPEED L
SLOWDOWN
You could name the batch file SLOW.BAT. Whenever you
need to run the SLOWDOWN program, insert the program
diskette in drive A. Then type
SLOW
and press
Enter. The
computer changes the speed to low and starts the
SLOWDOWN program.
See your MS-DOS manuals for instructions on creating and
using batch files.
4-6
Enhancing System Operations