Filter
Top Products
Plugging in the Printer
1.
Make sure the power switch on the printer is turned off. It is
off when the 0 on the switch is pressed down.
2.
Check the label on the back of the printer to make sure the
voltage required by the printer matches that of your
electrical outlet.
Caution:
If the rated voltage and your outlet voltage do not match,
contact your dealer for for assistance. Do not plug in the
power cord.
3.
If the power cord is not attached to the printer, connect it to
the AC inlet on the printer.
4.
Plug the power cord into a properly grounded electrical
outlet.
Setting Up the Printer
1-13