Filter
Top Products
72 Using the Projector Menus
■ Operation
Direct Power On:
Enable if you want to be able to start the
projector when you connect the power cord (without pressing the
Ppower button).
Sleep Mode: Enable if you want the projector to turn off
automatically if it is idle and no signal is received for 1 to 30
minutes (you can adjust the amount of time using the next
setting).
Sleep Mode Timer: When Sleep Mode is on, you can set the
period of time before the projector turns off automatically, from
1to 30 minutes.
High Altitude Mode: Enable when you are using the projector
above 4,900 feet (1,500 meters) to ensure that the temperature is
regulated properly. Turn this setting off for lower elevations.
Audio Input: Select a specific audio input source or set to Auto
to support any input source.
■ Standby Setup
Standby Mode
: Select Communication On to enable the
projector to be monitored and controlled from a computer when
it is in standby mode (the power light is orange). This setting also
allows you to use a microphone connected to the projector or to
run audio through the projector in standby mode.
Standby Microphone: Enable this setting to use a connected
microphone when the projector is in standby mode.
Standby Audio: Enable this setting to output audio when the
projector is in standby mode.
■ USB Type B
Select how you want to use the TypeB (square) USB port.
Select
USB Display to use the USB port to project computer
images. Select
Wireless Mouse to use the remote control
buttons like a wireless mouse. See page 58 for restrictions and
details.
note
If Direct Power On is
enabled, the power cord is
connected, and a power
outage occurs, the projector
will start when the power is
restored.
note
Do not use the projector at
altitudes above 7,500 feet
(2,286 meters).