Filter
Top Products
86 Using the Projector on a Network
3. Choose
Basic and press Enter. You see the following screen:
4. Make sure the projector has a unique name, so you can identify it
on your network.
If you need to rename it, highlight the
Projector name text box
then press
Enter.
5. Use the arrow buttons on the remote control to select individual
letters; then press
Enter to input a character. To navigate
backward and forward through the input text, highlight the
arrows and press
Enter. To toggle symbol settings or capital
letters, highlight the option and press
Enter. (The only symbols
available are the hyphen and underscore.) When you’re done,
highlight
Finish and press Enter.
6. If you want to create a password for using PJLink to control the
projector, highlight
PJLink Password, press Enter, and enter a
password of up to 8 alphanumeric characters. When you’re done,
highlight
Finish and press Enter.