Filter
Top Products
16 Connecting the Cables
For best results, connect your video equipment to the HDMI (High-Definition Multimedia
Interface) port, if possible. If your equipment doesn’t support HDMI, connect it to one of the
following ports (highest quality listed first): Input A or B (for component video), S-Video, or
Video (for composite video).
If you connect to the Input A or B port, be sure to select the correct Input Signal setting for
your equipment, or the image may not display properly (see page 19).
Making Other Connections
Connect the power cable and other cables described below, depending on how you plan to
use the projector.
■ Power cable
Plug the power cable into the projector and a grounded electrical outlet. The P power
light on the projector’s control panel turns orange when the projector is receiving power
and is in standby mode.
Connect video equipment to one of these ports
Connect a computer to one of these ports