Filter
Top Products
62 Solving Picture Problems
If you’re using a Macintosh with OS 9.x or earlier:
1. From the Apple menu, select
Control Panels, then click
Monitors and Sound.
2. Click the
Arrange icon, and
then drag one monitor icon on
top of the other.
If the
Arrange option isn’t available,
you may need to select one of the
Simulscan resolutions. Click the
Monitor icon and then select a
Simulscan resolution from the
Resolution box. (Allow a few
seconds for the projector to sync up.)
The picture is upside-down or reversed.
Change the
Projection setting in the menu system (see page 38).
Only part of the picture is displayed, or the picture is distorted.
■ Press the Aspect button to select a different aspect ratio (see page 23).
■ If the Aspect is set to Zoom, you may need to use the Zoom Caption option to see the
top or bottom section of the screen (so that subtitles are visible). See page 36.
■ Check the Output Scaling to make sure it’s adjusted correctly (see page 36).
■ Use the Position setting to reposition the image on the screen (see page 36).
■ If you’ve connected a computer and you see only half the image, make sure the
computer’s Dual Display setting is turned off.
Click here
4
.
Cl
ic
k
Mirror Displays in t
h
e
l
ower corner
of the screen. One of the monitor icons
automatically moves on top of the other.
Click here
Drag one
monitor icon on
top of the other