Filter
Top Products
Using Cinema Color Editor 49
Saving and Recalling Picture Settings
Once you’ve adjusted the picture using Cinema Color Editor, you can save your settings in
the projector’s memory. Then you can use the remote control (or Cinema Color Editor) to
easily recall them for future use.
To save your settings on the projector:
1. Select
Picture Quality, then click Memory management and choose Register.
2. On the next screen, select an unused memory name, then click
Register. Your current
settings are saved to the projector’s memory.
Note: If you’ve made changes to the projector’s RGBCMY settings, your settings are saved in the
projector’s Advance memory area; otherwise they’re saved under Standard.
1. Select
Picture Quality
2. Click Memory
management
3. Click
Register
1. Select an unused
memory name
2. Click Register