Appendix C outlines the system diagnostic checks you can
perform on your computer. If you are having trouble with any
part of the hardware, you may want to run some of these
diagnostic checks.
Appendix D describes how to perform a low-level format on
the hard disk. You need to do this only if you are having serious
problems with the hard disk in your computer or if you have
installed a new hard disk that has not received this type of
format. (This is not the same type of format provided by the
MS-DOS FORMAT command.)
Appendix E explains how to prepare a new hard disk for use.
You need to follow these instructions only if you have installed
a new hard disk in your computer or if you need to repartition
or reformat the one you have been using.
Appendix F lists the types of hard disks you can use in your
computer. You need to enter information from this table when
you run the Setup program after installing an additional hard
disk.
At the back of the manual you’ll find a glossary of the
computer terms used in this manual and an index.
Where to Get Help
Customer service for Epson products is provided by a network
of authorized Epson Customer Care Centers throughout the
United States. Call the Epson Consumer Information Center at
1-800-922-8911 for the following:
Customer Care Center referrals
Technical support referrals
Information on Epson User Groups.
To locate or purchase accessories or supplies, contact your
nearest Epson dealer or call 1-800-873-7766.
Introduction 3