Filter
Top Products
3. Type
SET UP
and press
Enter.
The screen displays the
main Setup menu with these options:
Exit
Memory
Display
Coprocessor
Mass storage
Real-timeclock
You use and to move the cursor block (the highlighted
bar) through the options on this menu. Once you highlight
the option you want, press Enter to select it.
If you do not want to make any changes, or when you have
finished making changes, select the
E
x
i t
option. See
“Leaving the Setup Program” below for instructions.
Note
Another way to start the Setup program is to turn on or reset
the computer with the Reference diskette in the drive. If you
do this, you see the following Operation menu:
OPERATION MENU
1 - Setup
2 - Format hard disk
3 - Format diskette
4 - System diagnostics
5 - Prepare hard disk for moving
0
- Exit to DOS for more utilities
Enter selectionnumber:
This is the menu for the setup and diagnostics programs on
the Reference diskette. Press 1 and then Enter to select the
Set
up option. The screen then displays the main Setup
menu.