Filter
Top Products
Note
The AUTOEXEC.BAT file is optional, and you can either
not create one at all or create one that is different. For a
description of AUTOEXEC.BAT, see Chapter 4; or see your
MS-DOS manual for more detailed information.
Follow these steps:
1.
Type
C
: and press
Enter
to log onto the hard disk.
2.
Type the following and press
Enter:
COPY CON
AUTOEXEC.BAT
3.
Type the following, pressing Enter after each line:
ECHO OFF
CLS
PROMPT = $P$G
PATH = C:\DOS
4.
Hold down the
Ctrl
key and press
Z.
Then press
Enter.
Now you can load MS-DOS from drive C on your hard disk. Be
sure there is no diskette in drive A when you turn on or reset
your computer. Otherwise, the computer tries to load MS-DOS
from the diskette in drive A. If drive A is empty (or the latch is
up), MS-DOS is booted from drive C.
Preparing a Hard Disk for Use
E-11