Filter
Top Products
8. Lower the scanner unit.
9. Press the OK button.
The print head moves to its home position and the printer starts charging the ink. This takes about
90 seconds. When you see a confirmation message on the screen, ink charging is finished.
Caution: Never turn off the product while the power light is flashing or you will waste ink.
If you see an error screen telling you an ink cartridge is installed incorrectly, press the OK button, lift
up the scanner unit, and press the ink cartridge down until it clicks into place. When you're finished,
press the OK button again.
If you remove a low or expended ink cartridge, you cannot re-install and use the cartridge.
Caution: If you remove an ink cartridge for later use, protect the ink supply area from dirt and dust and
store it in the same environment as the printer. The valve in the ink supply port is designed to contain
any excess ink, but do not touch the ink supply port or surrounding area. Always store ink cartridges with
the label facing up; do not store cartridges upside-down.
Note: If you replace a cartridge while copying a document or photo on the scanner glass, cancel printing
and make sure your original is still placed correctly on the document table. Then copy your original
again.
Parent topic: Replacing Ink Cartridges
Related concepts
Purchase Epson Ink Cartridges
196