Filter
Top Products
14
Adjusting the Image Quality
The quality of the screen images can be adjusted as follows.
Turn the focus ring to adjust the image
focus.
The following five color modes have been preset for use with images with varying characteristics. You can
use these color modes to obtain the optimum image quality easily, just by selecting whichever color mode
best suits the images. The brightness of the projected images will vary depending on the mode.
Procedure
Press buttons [1] to [5] on the remote
control to select the color mode.
Focusing the Screen Image
•
••
•
If the surface of the lens is dirty or misted
over as a result of condensation, it may
not be possible to adjust the focus
correctly. If this happens, clean or de-mist
the lens. (p.46)
•
••
•
If the distance from the projector to the
screen is less than 0.9 m (3.0 ft.), the
focus will not be correct. Check the
distance between the projector and the
screen.
Selecting the Color Mode
Mode name Use
Dynamic Ideal for projecting images with greater modulation and intensity.
Theatre Ideal for enjoying presentations such as movies which have large numbers of dark scenes.
Natural Ideal for enjoying presentations in a natural atmosphere.
PC Ideal for use in making images as bright as possible when projecting computer images.
sRGB
Images conform to the sRGB standard. If the connected video source has an sRGB mode, set both the
projector and the video source to sRGB.
The color mode setting can also be changed using the Color Mode command of the projector's
Video menu. (p.21, 22)
Focus ring
Remote control