Filter
Top Products
Settings and Useful Functions
25
Advanced Menu
Main menu Sub-menu Function
Default
setting
Advanced Language Sets the language for message displays.
•
••
•
Press the button on the projector's control panel or the [Enter] button
on the remote control, and select the language from the selection menu
that appears.
English
Startup
Screen
Sets whether the startup screen is displayed or not.
•
••
•
To change the user's logo, you need to record and set your own logo.
ON
Color
Adjustment
Adjusts the color temperature
and intensity of each RGB color in the
image.
Absolute color temperature: Lighter colors are adjusted so that they range
from having a red tinge to having a blue tinge. When the color temperature
is lower, the red content is greater and color tones appear softer. When the
color temperature is higher, the blue content is greater and color tones
appear fresher.
•
••
•
Press the button on the projector's control panel or the [Enter] button
on the remote control, and make the setting using the color temperature
menu that appears.
RGB: Sets the intensity of each color (red, green and blue).
•
••
•
Press the button on the projector's control panel or the [Enter] button
on the remote control, select R (red), G (green) or B (blue) from the color
definition menu that appears, and then make the adjustment.
•
••
•
You can adjust the colors while viewing the results on the screen.
(This item cannot be selected if sRGB has been selected as the Color Mode
setting in the Video menu.)
Color Temp :
Depends on
connection
Rear Proj. Use when projecting images from behind a translucent screen.
When set to ON, the projected images are horizontally reversed.
OFF
Ceiling Use when installing the projector to a ceiling or when using the projector
upside down.
When set to ON, the projected images are horizontally and vertically
reversed.
OFF
COM Port Switches between Control (RS-232C) and USB serial communication. RS-232C
Reset Resets all adjustment values for the Advanced menu functions to their
default settings.
•
••
•
Press the button on the projector's control panel or the [Enter] button
on the remote control to display the confirmation screen, and select Yes.
•
••
•
Select Reset All to return all menu settings to their default settings. (p.27)
-
Video Menu Setting Menu Advanced Menu Reset All Menu
Audio Menu
User's Logo Menu About Menu Using the Menus