Filter
Top Products
Saving a User's Logo
52
6
Select the zoom rate in the Zoom rate
setting screen, and then press the
button on the projector's control panel
or the [Enter] button on the remote
control.
7
Select Yes at the confirmation screen,
and then press the button on the
projector's control panel or the [Enter]
button on the remote control.
The image will then be saved. Once the image has
been saved, the message "Saving the user's logo is
completed." will be displayed.
•
••
•
Saving the user's logo may take a few moments (about 40 seconds). Do not use the projector or
any other sources which are connected to the projector while the user's logo is being saved,
otherwise it may result in errors in projector operation.
•
••
•
User's logos can be saved at up to 400 x 300 dots in size.
•
••
•
If the image resolution is not XGA , or if a video image is being projected, the display size will
be changed.