Epson EMP-70 Projector User Manual


 
15
1.3 Remote Control
Operating Range
The remote control may not operate beyond certain distances and angles from
the receiver on the projector. Observe the following conditions during use.
[Operating Distance : Approximately 10m (393.70inches) ]
[Operating Area:]
Horizontally
Vertically
Point:
• The remote control R/C On Off switch must be switched to "On" to use the remote
control.
• Point the remote control towards the remote control receiver on the projector unit.
• Certain screens may shorten the operating distance (approximately 10m
(393.70inches) ) of the remote control when the control is pointed towards the screen
to reflect its signal during use.
• Situate the remote control receiver out of direct sunlight, fluorescent light, and
similar light sources.
These may cause the remote control to malfunction.
• If the remote control malfunctions or stops operating, the batteries may need
changing.
Replace the batteries with a fresh set.
Remote Control
Transmitter
Remote Control Receiver
Approximately 30º Approximately 30º
Approximately 15º