Filter
Top Products
68
7.2 Lamp Replacement
Replace the lamp with a new lamp in the following instances.
A replacement lamp is an optional part (sold separately).
(Model No: ELPLP13)
[When the following message is displayed for 30 seconds after projection
begins: "Lamp Replace. After the replacement of the lamp, reset the lamp
timer under the direction in the user’s manual."]
[When the problem/alarm display indicator flashes red at 1-second intervals.]
[When brightness or picture quality is inferior to its original state.]
Point:
• If the lamp does not light, replace it even if the lamp life has not expired.
• To maintain the original brightness and picture quality, replace the lamp as soon as
possible after a replacement message appears.
• To maintain the original brightness and picture quality, replacement messages are set
for approximately 1,400 hours.
• Though a replacement message appears at approximately 1,400 hours, individual
lamp characteristics or usage conditions may cause failure before 1,400 hours, and
we recommend that a replacement lamp be kept on hand.
• A replacement lamp can be purchased from your local Epson product vendor.
Replacement
Point:
• Install the lamp securely. For safety, when the lamp cover is opened, the abnormal
warning display indicator flashes red, and the projector lamp goes out. If the lamp or
lamp cover is installed improperly, the lamp will not light.
A message will be displayed.
Problem/alarm display indicator
flashes red at 1-second intervals