Filter
Top Products
64
The Remote Control Does Not Operate
• Is the remote control R/C On Off switch set to On?
See page 29
•
Are you pointing the remote control in the correct
direction for operation? See page 15
The range of operation is approximately 30° left or right
and approximately 15° above or below the remote control
sensor on the projector.
•
Is the remote control too far from the projector?
See page 15
The operable distance is approximately 10m
(393.70inches).
• Is the remote control receiver on the projector
blocked?
• Is the remote control receiver in the path of direct
sunlight or strong fluorescent light?
• Are batteries in place? See page 16
• Are the batteries worn? See page 16
• Are the batteries inserted correctly? See page 16
Cannot Switch off (After Pressing the Power Button)
•
The operation display indicator remains a steady
orange.
The operation display indicator of the projector is
designed to remain lit even after power is switched off.
When the plug is pulled out of the outlet, the operation
display indicator will go out.
•
The fan does not stop.
After the Power button is pressed and power is turned off,
cool-down* begins. See page 74
After cool-down, the operation display indicator lights
orange, and you should pull the plug out of the outlet.
* Cool-down time varies depending on the external
temperature and other factors.
OFF