Filter
Top Products
36
4.
Pull the power cord plug out of the outlet.
Caution:
Do not pull the power cord plug out of the outlet
while the operation display indicator is flashing
orange. This may cause a malfunction or
shorten the projector lamp life.
5.
Set the remote control R/C On Off switch to
Off.
Point:
Unless the remote control R/C On Off switch is
switched off, a small amount of current will be
supplied to the remote control and exhaust the
batteries. If the remote control will not be used
for a long period or you are moving the unit, set
the remote control R/C On Off switch to Off.
Storage
When you are finished projecting, retract the foot levers into the unit.
1.
Support the projector unit with your hands,
pull upward on the foot levers with your
fingers, and lower the unit slowly.
2.
Attach the lens cover.
Power cord
Power Cord Plug
Outlet
Foot Levers