Filter
Top Products
28
3.4 Projecting Images
Here we begin projecting images from an A/V device.
Preparation
Warning:
• Never look into the lens when the projector is switched on. The intense light can
damage your vision.
• Use only the power cord supplied. Use of other cables may cause fire or electric
shock.
Caution:
• Do not attempt projection with the lens cover in place. Heat may deform the lens
cover.
1.
Check that the projector and computer or A/
V device are connected.
2.
Remove the lens cover.
3.
Attach the power cord (supplied with
projector) to the projector.
Align the power cord connector with the
power terminal on the projector and insert
the connector firmly and completely into the
terminal.
4.
Insert the plug end of the power cord in an
outlet. The operation display indicator will
light with an orange color.
Point:
Buttons cannot be operated while the operation
display indicator is flashing orange.
Power Terminal
Power Cord Connector
Power cord
Power cord
Power Cord
Plug
Outlet