Filter
Top Products
EPSON EPL-N2700 Rev. A
Chapter 4 Disassembly/Assembly 102
4.2.10 Paper Size Sensor Removal
1. Remove the Rear Cover. (See Section 4.2.6.)
2. Remove the MP Cassette.
3. Remove one screw (3501) securing the paper size sensor bracket
to the printer frame, and remove the plate along with the sensor.
4. Release the hook fixing the sensor to the holder and remove the
sensor.
5. Disconnect the harness from the connector on the sensor.
Figure 4-21. Paper Size Sensor Removal
4.2.11 Top Cover Removal
1. Remove two screws (3541) securing the Top Cover to the printer
through the left cover.
2. Lift up the left edge of the Top Cover and remove the Top Cover.
Figure 4-22. Top Cover Removal
Paper Size Sensor
Printer Frame
Bracket
Top Cover
Left Cover