Filter
Top Products
EPL-N2700 Revision A
Troubleshooting Overview 81
Cover C3 Open Error
Cover E Open Error
Cover F Open Error
Cover G Open Error
Multibin is removed Error
Manual Feed ssssss tttt Error
Remove Output Paper Error
Can’t Print Duplex Error
Paper Out sssss tttt Error
Toner Out Error
Paper Set sssss tttt Error
Print Overrun Error
Mem Overflow Error
Duplex Mem Overflow Error
Invalid Option Error
Invalid PS3 Error
Invalid Aux I/F Card Error
Invalid ROM A Error
Invalid ROM B Error
Writing Error ROM A Error
Writing Error ROM P Error
Reset to Save (Status)
Writing ROM A Status
Writing ROM P Status
Memus Locked (panel setting
display)
Warning
Collate was disabled Warning
Check Paper Size Warning
Image Optimum Warning
Check Paper Type Warning
Outbin Select Error Warning
Need Memory Warning
Table 3-1. Printer Message
Message Type
Format Error ROM A Warning
Format Error ROM B Warning
Form Feed (Test printing display) Warning
Warming Up Status
Toner Low Warning
Offline Status
Standby Status
Ready Status
*1: x = LCC/Multibin, yyy = 3-digit number
<x> <yyy>
LCC#132:LCC carrier motor error (2-20)
#133:LCC lift motor error (2-21)
#135:LCC lifter 1 limit error (2-23)
#136:LCC lifter 2 limit error (2-24)
#137:LCC communication error (2-25)
Multibin#740:Shift error (2-28) (5-bin mailbin)
#743:Movable guide drive error (2-30)
(5-bin mailbin)
#748:Horizontal carrier drive error (2-30)
(10-bin, Finisher)
#750:Carrier driver error (2-32)
(10-bin, finisher)
*2: Jams may occur in several locations at once, and if that happens,
the locations are given in this order of priority:
A, B, C1, C3, D, E, F, G, L, LC2, LC3 (with a maximum of four lo-
cations displays). There will be a space between each of the in-
diations of jam locations.
Table 3-1. Printer Message
Message Type