Filter
Top Products
EPL-N2700 Revision A
Maintenance Overview 137
6.1.3 Maintenance by Servicers
The units listed in the following table are replaced by the servicers.
Table 6-3. Maintenance by Servicers
NOTE:Figures are applicable under the conditions below:
Duty: 5%, A4 LEF, Continuous printing
Replaced item Replacement cycle
Fusing Unit 500,000 sheets
Image Transfer Roller Unit 150,000 sheets
Paper Take-Up Roller 120,000 sheets
CAUTION
After replacing the Fusing Unit, perform “Fuser
Counter Clear” in the maintenance mode. (See
Chapter 1 / Section 1.4.5.)
After replacing the Image Transfer Unit, perform “TR
Counter Clear” in the maintenance mode. (See
Chapter 1 / Section 1.4.5.)
After replacing the Paper Take-up Roller, perform
“MP Counter Clear” and “LC1 Counter Clear” in the
maintenance mode. (See Chapter 1 / Section 1.4.5.)
CHECK
POINT
The grease type used for the Drive Section is
MOLYCORT EM-50L. (Do not apply to the Fusing Unit.)