Filter
Top Products
EPSON EPL-N2700 Rev. A
Chapter 4 Disassembly/Assembly 117
13. Remove one pressure spring on the front, E-ring (9107), and
remove the yellow Pressure Lever Assembly.
Figure 4-44. Front Pressure Lever Removal
14. Remove the Upper Fusing Roller and the bearings.
Figure 4-45. Upper Fusing Roller Removal
15. Remove two C-rings attached to the front and rear ends of the
Lower Fusing Roller.
16. Remove the Lower Fusing Roller by pulling it out from the gear side.
Figure 4-46. Lower Fusing Roller Removal
17. Remove one screw (1309) securing the Fusing Roller Thermistor to
the Fuser Unit Frame Assembly and remove the Fusing Roller
Thermistor.
Figure 4-47. Fusing Roller Thermistor Removal