Filter
Top Products
Printing on CDs and Special Media 69
Printing on Card Stock or Matte Board
You can use the manual feed slot in the back of the printer to print on white card
stock or matte board up to 1.3 mm (0.051 inch or 51 mil) thick, in the following
sizes: letter, legal, or A4 size.
Before you start, remove the paper support. Then turn the printer on. (The printer
must be on to load card stock correctly.)
1. Push in the output tray extension, but leave the tray open.
2. Set the paper thickness lever to the position. The paper light begins flashing
rapidly.
3. Slide the edge guide to the right to make room for the card stock.