Filter
Top Products
Printing on CDs and Special Media 71
7. Set the paper thickness lever to the position. (If the print quality is not
satisfactory, try setting the paper thickness lever to the position for the next
print.)
If you’re using the manual feed slot to print on paper rather than card stock, set
the paper thickness lever to the position.
8. Close the printer cover and press the button to feed the card stock into the
printer.
Note: If the paper light flashes, make sure the paper thickness lever is set
correctly, then press the button again.
9. Before you print, make sure you select Manual or Manual Feed as the paper
source in your printer software (see “Printing in Windows” on page 21 or
“Printing on a Macintosh” on page 31).
When you’re finished printing on card stock, make sure you return the paper
thickness lever to the position.
Caution: Don’t move the paper thickness lever during printing; this could damage
your printer.