Filter
Top Products
98 Solving Problems
■
Try using Automatic mode
(Macintosh only). See “Printing
on a Macintosh” on page 31 for
instructions.
■ Try changing the Gamma
setting. See “Customizing
Windows Print Settings” on
page 25 or “Customizing
Macintosh Print Settings” on
page 38 to access the Advanced
settings.
■ Your printed colors can never
exactly match your on-screen
colors. However, you can use a
color management system—
such as ICM (Windows) or
ColorSync (Macintosh)—to get
as close as possible. See
“Customizing Windows Print
Settings” on page 25 or
“Customizing Macintosh Print
Settings” on page 38 for details.
Paper Problems
Paper doesn’t eject fully or is
wrinkled.
■ If the paper doesn’t eject fully,
you may have set the wrong
paper size. Press the paper
button to eject the paper, then
select the correct paper size.
■ If it’s wrinkled when it ejects,
the paper may be damp or too
thin. Load new paper.
Paper sheets don’t feed correctly
or jam in the printer.
■ If paper doesn’t feed or multiple
pages feed, remove it from the
sheet feeder. Fan the edges of
the sheets, reload them against
the right side of the feeder, and
slide the edge guide snugly, but
not too tightly, against the
paper. Don’t load paper above
the arrow on the left edge guide.
■ If paper jams, press the paper
button. If necessary, open the
cover and remove any jammed
or torn pieces. Load new paper
and press the paper button.
You can also set the paper
thickness lever to the
position, pull out the jammed
paper, and then return the lever
to the position.
Card stock doesn’t feed correctly
or jams in the printer.
Follow the steps in “Printing on
Card Stock or Matte Board” on
page 69 to use the manual feed slot.