Filter
Top Products
30 Printing From Start to Finish
6. After the pattern is printed, examine the print and make the Print Color
Correction
(Windows) or Color Correction (Macintosh) setting lighter or
darker as necessary.
You can print three density patterns on one disc. Each pattern is printed in a
different location.
7. After the first pattern is printed, adjust the setting, then repeat steps 4 through
6, selecting
Second or Second Time to print the second pattern.
8. If you want to try a third Color Correction setting, you can repeat steps 4
through 6 again and select
Third or Third Time.
9. Remove the CD or DVD and let it dry for at least 24 hours. Then check the
saturation levels again.
You can also use the Brightness and Contrast settings in EPSON Print CD to
adjust color saturation. See the EPSON Print CD on-screen help for instructions.
R220.book Page 30 Sunday, August 7, 2005 3:41 PM