Filter
Top Products
36 Maintaining Your Printer
Removing and Installing Ink Cartridges
Be sure you have a new ink cartridge before you begin. Once you start replacing a
cartridge, you must complete all the steps in one session.
1. Make sure the printer is turned on (the green P power light should be on, but
not flashing). Then open the printer cover.
2. Press and release the H ink button.
If your ink light is off, go to step 4.
If your ink light is on or flashing, the print head moves to the left, and the
cartridge that need to be replaced stops under the _ ink out mark. The
P power light begins to flash. Go to step 3.
3. Press the H ink button again.
■ If more than one cartridge is empty, the next cartridge moves under the
_ ink out mark.
■ If all the empty cartridges have been identified, the print head moves to
the ink cartridge replacement position.
Note:
You can also use the Status Monitor to find out which cartridge is out of ink. See
“Checking the Ink Supply” on page 33 for more information.
4. Lift up the cartridge cover.
R220.book Page 36 Sunday, August 7, 2005 3:41 PM