Filter
Top Products
3. Using the table below, confirm your setting preference and
press the
Reset
button to toggle the setting, if necessary.
Setting Light status
On (enabled): Black ink out light is on
Off (disabled): Cyan ink out light is on
4. Press the
Eject
button to exit the setting mode or press
Operate
to exit the mode and turn the printer off.
Parallel interface ECP mode
If your computer and the computer’s interface support ECP
mode (see your computer documentation for details), you can
set the printer parallel interface mode to ECP, which increases
communication speed between the printer and computer. If
you encounter any printing problem, turn this setting off. To
make or verify this setting, follow the steps below.
1. Make sure that the printer is turned off.
2. Hold down the
Reset
and
Cleaning
buttons and press the
Operate
button to turn on the printer. The Operate light
and the paper tray light start flashing.
3. Using the table below, confirm your setting preference and
press the
Reset
button to toggle the setting, if necessary.
Setting Light status
On (enabled): Black ink out light is on
Off (disabled): Cyan ink out light is on
4. Press the
Eject
button to exit the setting mode or press
Operate
to exit the mode and turn the printer off.
L
Keywest Ref. Guide
Rev.c
A5 size Chapter 6
10-09-97 DR, pass 0
6-8
The Control Panel