Epson Pro 5000 Printer User Manual


 
Replacing an Ink Cartridge
The printer’s indicator lights will inform you when it is time
to obtain a replacement ink cartridge and when it is time to
replace an empty cartridge.
Note:
If you remove an ink cartridge and then reinstall it, the printer cannot
determine the correct level of ink remaining and the corresponding ink
out light may not flash to warn you even when the cartridge is almost
out of ink. Only install unused ink cartridges.
EPSON recommends the use of genuine EPSON ink cartridges.
Other products not manufactured by EPSON may cause
damage to your printer not covered by EPSON’s warranties.
The following table describes the lights status and actions
required.
Light status Actions required
Obtain a replacement black ink cartridge
(S020118).
Replace the empty black ink cartridge.
Obtain a replacement cyan ink cartridge
(S020147).
Replace the empty cyan ink cartridge.
Obtain a replacement magenta ink cartridge
(S020143).
and = off, and = on, and = flashing
L
Keywest Ref. Guide
Rev.c
A5 size Chapter 7
10-09-97 DR, pass 0
7-2
Maintenance and Transportation