Filter
Top Products
Printing on Photo Quality Glossy Film and Ink Jet
Transparencies
When printing on Photo Quality Glossy Film and Ink Jet
transparencies, please follow the instructions below:
1. See the table below, and determine the most appropriate paper
path. Then load transparencies or glossy film according to the
instructions in Chapter 2, “Paper Handling.”
Paper path Printable side Remarks
Paper tray Down: load the
transparency or glossy film in
the paper tray with the cut
corner located on the right
side of the trailing edge.
Paper loading capacity
varies depending on the
media type. See page 2-5.
If a support sheet is
packed with the Glossy
Film, put the support sheet
or a piece of plain paper
under the stack of Glossy
Film.
Lower paper tray
Front manual
feed slot
Down: load the
transparency or glossy film
in the front manual feed
slot with the cut corner
located on the right side
of the trailing edge.
You can load one sheet at
a time.
Rear manual
feed slot
Up: load the transparency
or glossy film in the rear
manual feed slot with the
cut corner located on the
right side of the trailing edge.
Note:
The paper sizes you can load and the direction you load the paper
varies depending on the paper path. See page 2-3 for details.
1
R
Keywest Ref. Guide
Rev.c
A5 size Chapter 1
10-09-97 DR, pass 0
Printing on Various Kinds of Paper
1-13