Filter
Top Products
Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
94 93
TM-T88III series
Specification
(STANDARD)
B
ESC L
[Name] Select page mode
[Format] ASCII ESC L
Hex 1B 4C
Decimal 27 76
[Description] Switches from standard mode to page mode.
[Details]
• This command is enabled only when processed at the beginning of a line in standard mode.
• This command has no effect in page mode.
• After printing by FF is completed or by using ESC S, the printer returns to standard mode.
• This command sets the position where data is buffered to the position specified by ESC T
within the printing area defined by
ESC W.
• This command switches the settings for the following commands (in which the values can be
set independently in standard mode and page mode) to those for page mode:
① Set right-side character spacing: ESC SP, FS S
② Select default line spacing: ESC 2, ESC 3
• Only valve settings is possible for the following commands in page mode; these commands
are not executed.
① Turn 90° clockwise rotation mode on/off: ESC V
② Select justification: ESC a
③ Turn upside-down printing mode on/off: ESC {
④ Set left margin: GS L
⑤ Set printable area width: GS W
• The following command is ignored in page mode:
➀ Execute test print: GS ( A
• The following command is not available in page mode:
① Print NV bit image: FS p
② Define NV bit image: FS q
➂ Write to NV user memory: FS g 1
➃ Print raster bit image: GS v 0
• The printer returns to standard mode when power is turned on, the printer is reset, or
ESC @ is used.
[Reference]
FF, CAN, ESC FF, ESC S, ESC T, ESC W, GS $, GS \, 3.12 Page Mode