Filter
Top Products
Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
113 112
TM-T88III series
Specification
(STANDARD)
B
FS q n [xL xH yL yH d1...dk]1...[xL xH yL yH d1...dk]n
[Name] Define NV bit image
[Format] ASCII FS q
n [xL xH yL yH d1...dk]1...[ xL xH yL yH d1...dk]n
Hex 1C 71
n [xL xH yL yH d1...dk]1...[ xL xH yL yH d1...dk]n
Decimal 28 113
n [xL xH yL yH d1...dk]1...[ xL xH yL yH d1...dk]n
[Range] 1
≤ n ≤ 255
0
≤ xL ≤ 255
0
≤ xH ≤ 3 (when 1 ≤ (xL + xH × 256) ≤ 1023)
0
≤ yL ≤ 255
0
≤ yL ≤ 1 (when 1 ≤ (yL + yH × 256) ≤ 288)
0
≤ d ≤ 255
k = (xL + xH × 256) × (yL + yH × 256) × 8
Total defined data area = 2M bits (256K bytes)
[Description] Define the NV bit image specified by
n .
• n specifies the number of the defined NV bit image.
• xL, xH specifies (xL + xH × 256) × 8 dots in the horizontal direction for the NV bit image you
are defining.
• yL, yH specifies (yL + yH × 256) × 8 dots in the vertical direction for the NV bit image you
are defining.
[Details]
• This command cancels all NV bit images that have already been defined by this command.
The printer can not redefine only one of several data definitions previously defined. In this
case, all data needs to be sent again.
• From the beginning of the processing of this command till the finish of hardware reset,
mechanical operations (including initializing the position of the printer head when the cover is
open, paper feeding by using the FEED button, etc.) cannot be performed.
• During processing this command, the printer is in BUSY when writing the data to the NV user
memory and stops receiving data. Therefore it is prohibitted to transmit the data including
the real-time commands during the execution of this command.
• NV bit image means a bit image which is defined in a non-volatile memory by FS q and
printed by
FS p.
• In standard mode, this command is effective only when processed at the beginning of the
line.
• In page mode, this command is not effective.
• This command is effective when 7 bytes <FS∼yH> is processed as a normal value.
• When the amount of data exceeds the capacity left in the range defined by xL, xH, yL, yH, the
printer processes
xL, xH, yL, yH out of the defined range.
• In the first group of NV bit images, when any of the parameters xL, xH, yL, yH is out of the
definition range, this command is disabled.
• In groups of NV bit images other than the first one, when the printer processes xL, xH, yL, yH
out of the defined range, it stops processing this command and starts writing into the NV
images. At this time, NV bit images that haven’t been defined are disabled (undefined), but
any NV bit images before that are enabled.