Filter
Top Products
3.2.6.2 ASF Unit Removal
1. Remove the printer mechanism (see Section 3.2.5).
2. Press down the tab on the left side; then pull the ASF unit toward you.
3. Press the tab on the right side; then remove the ASF unit.
When you remove the ASF, be extremely careful of the PE sensor. Pull the top of the ASF unit
toward the front of the mechanism to clear the PE sensor.
3.2.6.3 PE Sensor Removal
1. Remove the printer mechanism (see Section 3.2.5).
2. Remove the ASF unit (see Section 3.2.6.2).
3. Disconnect CN7 on the C199 MAIN Board, then remove the PE sensor.
2
1
1
ASF Unit
CAUTION
ASF Unit
PE Sensor Actuator
Figure 3-11. ASF Unit Removal
PE Sensor Actuator
1-Screw
Figure 3-12. PE Sensor Remopval
CAUTION
EPSON Stylus Color 200 / EPSON Stylus 200 Disassembly and Assembly
Rev. A 3-9