Epson 400 Printer User Manual


 
2.
Check the label on the back of the printer to make sure the
voltage required by the printer matches that of your
electrical outlet. Also, make sure that you have the correct
power cable for your power source.
Q
Caution:
It is not possible to adjust the
printerfor
use at another
voltage.
If
the rated voltage and your outlet voltage do not
match, contact your dealer for assistance. Do not plug in
the power cord.
3.
If the power cord is not attached to the printer, connect it to
the
AC inlet on the back
of the
printer.
4.
Plug the power cord into a properly grounded electrical
outlet.
Installing the Ink Cartridge
Each ink cartridge contains enough ink to print about
700
pages. The exact number of pages a single cartridge
can print
varies
according to the amount of text and graphics on each
page-
e
Caution:
The ink cartridge is a self-contained unit. Under normal
circumstances, ink will not leak from the cartridge.
lf
ink does
get on your hands, wash them thoroughly with
soap-and
water.
lf
ink gets into your eyes,ftush them immediately with
water.
The first time you use your new printer, you need to charge the
ink delivery system with ink. You need to perform this
operation only once.
1-8
Setting Up Your Printer