Filter
Top Products
Software
lnltlallzatlon
*
Software sends the
ESC
@
(Inltlalize
the
printer) command.
The following condition then results:
1)
The
prlnt
buffer is cleared.
2)
The
defautt
values are set. (The last
panel
settings
are maintained.)
Control panel
lnltiallzatlon
* Hold down the Alt button and press the
Load/Eject button.
The
following
resuits:
1)
The
printer
mechanism Is
inltlallzed.
2)
The
Input
data buffer
is
cleared.
3)
The download character set
is
cleared.
4)
The
print
buffer is cleared.
5)
The default values are set. (The
last
panel settings are kept.)
L
Default settings
The table below shows the default settings that take effect when the
printer is initialized.
Item Default
sefflng
Top-of-form
posltion
Page length
Current paper
positlon
Single sheets:
65
lines
for
A6slze
paper
61
lines
for letter-size paper
22
inches for manual
insertion
Left and right
margins
Line
spacing
Canceiled
l/6-Inch line
spaclna
Character
size
I
10.5
point
Vertical tab
positlon
Cleared
Horizontal tab
positions
Font
selection
Every eight characters
Last font selected on control panel
Special
prlntlng
effects
Download character set
Cancelled
(except condensed printing)
Hardware/control panel
Initialization:
cleared
Software
Inltlallzatlon:
deselected
onlv
In addition, hardware and control panel initialization clears the data
buffer.
Appendix A-11