Filter
Top Products
Setting Up the PriorityFax
Note
Be sure not to insert the paper roll upside down. If the
paper roll is inserted upside down, the fax machine cannot
produce an image.
Place the paper into the machine. Then pull approximately five
inches (15 cm) of paper from the top of the roll and insert the end
of the paper under the paper cutter guide, as shown in the
illustration below. (Paper loading instructions are also printed
inside the fax machine.)
If you’ve inserted the paper correctly, it comes out through the
front of the machine. Make sure that approximately four inches
(10 cm) of paper protrude from the unit.
Push. the recording paper cover shut until you hear a click. The
automatic cutter then cuts off the excess paper.
Note
Any time you open the recording paper cover, make sure
that the paper remains under the paper cutter guide when
you close the cover.
STOP
Press STOP. The fax machine is ready for use.
1-11