Filter
Top Products
PriorityFax 1000 Manual
While holding down the DIAL TONE RESET button, enter a
telephone number using the keypad. If you are using an
international access code, press REDIAL after the code and before
the rest of the number. Also, if your telephone system requires a
code such as 9 before a telephone number, press REDIAL after the
code. Pressing REDIAL inserts a pause in the dialing. You may
enter a maximum of 16 digits (15 if tone is selected) for each one
touch number. (A pause counts as one digit.)
Press Ml.
Release the DIAL TONE RESET button. The number you entered
is now stored and can be dialed with the Ml button.
Write down an identification next to Ml on the Memory Index
label on the telephone cradle.
Repeat the above steps to create two more one-touch fax numbers.
After you have registered the one-touch numbers, you can send a
fax to any of those numbers in just four steps:
Insert the document face down in the feeder.
Lift up the handset and wait for a dial tone.
Press the button for the one-touch fax number you want to use -
M1,M2,orM3- and listen for the fax tone.
Press START and hang up when you hear the fax tone.
2-10