Filter
Top Products
Troubleshooting
Copying
(continued)
No image appears on the paper roll.
The paper roll may be inserted upside down. See Chapter 1.
Be sure that you inserted the document in the feeder face
down. Try copying again.
Print quality of the copy is poor.
You may be using the wrong type of paper. Use Epson
PriorityFax recording paper for best results.
Telephone
One-touch and sped dialing don’t wok.
After checking the type of paper you are using, try the following
steps:
Make another copy but change the contrast setting as described on
page 2-7.
Make another copy, but change the resolution setting as described
on pages 2-6 and 2-7. For detailed drawings or photos, use the fine
or photo modes.
Clean the inside of the fax machine as described in Chapter 5 and
make another copy.
If none of these methods improves the image quality, take the
fax machine to an authorized Epson Customer Care Center.
To find the location of the nearest Customer Care Center, call
1-800-922-8911.
The one-touch and speed dialing numbers are not registered
properly. See Chapter 3.
You may need to replace the memory batteries in the
PriorityFax. Follow the instructions on pages 2-3 through 2-4.