Filter
Top Products
PriorityFax 1000 Manual
Receiving
(continued)
The telephone rings continuously.
Be sure that the recording paper roll is inserted. If not, load in a
roll of thermal recording paper as described in Chapter 1.
When the AUTO ANS
switch on the back control panel is
turned off, the telephone rings ten times before reception
begins.
Turn on the
AUTO ANS
switch.
The paper cover may not be closed securely. Push the cover
shut until you hear a click
Received
document image quality Is poor.
The scanning area may be dirty. See Chapter 5 for cleaning
instructions.
You may be using the wrong type of paper. Use Epson
PriorityFax recording paper for best results.
The sending party’s resolution and/or contrast may need
adjustment. Check with the sending party.
If none of these methods improves the image quality, take the
fax machine to an authorized Epson Customer Care Center.
To find the location of the nearest Customer Care Center, call
1-800-922-8911.
Copying
Nothing comes out of the paper slot.
The paper roll may not be inserted properly. See Chapter 1.
The recording paper may be jammed. Push down on the paper
cover button to open the fax machine. Pull out the jammed
recording paper. Use scissors to make a clean edge on the end
of the paper roll. Reinsert the paper according to the
instructions in Chapter 1.
4-4