Filter
Top Products
PriorityFax 1000 Manual
One-touch
Telephone Dialing
The PriorityFax allows you to register three one-touch telephone
numbers for dialing frequently called numbers by pushing just one
button. If you prefer using one-touch dialing for fax numbers, see
Chapter 2 First you must register the one-touch telephone
numbers.
Note
Using one-touch dialing requires use of the telephone’s
memory capability. Your telephone unit requires annual
replacement of two button batteries to ensure that the
telephone numbers stored in memory are not erased
during a power failure. See Memory Batteries in
Chapter 2.
Registering One-touch
Telephone Numbers
To register one-touch telephone numbers, first set the TONE/
PULSE switch as described on page 3-2 Then follow the steps
below:
Lift the telephone handset and locate the DIAL TONE RESET
button, which is the large button at the bottom.
REDIAL
While holding down DIAL TONE RESET, enter the telephone
number using the keypad. If you are using an international access
code, press REDIAL after the code and before the rest of the
number. Also, if your telephone system requires a code such as 9
before a telephone number, press REDIAL to enter a pause after
the code. A maximum of 16 digits (15 if tone is selected) may be
entered for each one-touch number. (A pause counts as one digit.)
3-4