Filter
Top Products
Pressure Systems, Inc. NetScanner™ System (9016, 9021, & 9022) User’s Manual
www.PressureSystems.com
3 - 63
NOTE: Coefficients used for typical applications are shown in BOLD type.
All other coefficients are typically not used outside of advanced
diagnostic functions.
The coefficients of internal DH200 transducers used in the Model 9016 are selected
with array indexes aa=01 through 10 (hex). Coefficients of external 9400
transducers used by Models 9021 and 9022 (digitally compensated) are selected
with array indexes aa=01 through 0C (hex). All valid coefficient indexes (for each
of these arrays) are listed in the following table:
cc
Transducer Coefficient Description Datum
Type
00
Re-zero Cal Adjustment (offset) term
FLOAT
01
Span Cal Adjustment (gain) term
FLOAT
02
Dynamic EU Conversion coefficient c0
FLOAT
03
Dynamic EU Conversion coefficient c1
FLOAT
04
Dynamic EU Conversion coefficient c2
FLOAT
05
Dynamic EU Conversion coefficient c3
FLOAT
06 Reserved for Factory Use ----
07
User Defined Date field (see end-of-table note)
INTEGER
08 Date of Factory Calibration (see end-of-table note) INTEGER
09
Transducer Manufacturing Reference number
INTEGER
0A
Transducer Full-Scale Range code (see Appendix F)
INTEGER
0B-0F Temperature 1, Pressures 1-5 voltages FLOAT
10-14 Temperature 2, Pressures 1-5 voltages FLOAT
15-19 Temperature 3, Pressures 1-5 voltages FLOAT
1A-1E Temperature 4, Pressures 1-5 voltages FLOAT
1F-23 Temperature 5, Pressures 1-5 voltages FLOAT