Filter
Top Products
Extron • Matrix 3200/6400 Series • User’s Manual
Chapter 4 • Programmer’s Guide
SIMPLE INSTRUCTION SET COMMANDS (PAGE 3 OF 3)
LIST COMMANDS ASCII (HOST-SWITCHER) RESPONSE (SWITCHER-HOST)
List Remote Keypad LK ADDR#MODE ID# NAME USER INPUT
Example response for LK command ADDR#MODE ID# NAME USER INPUT
1 GLBL ,
ØØ
,,
Ø
1
2 OUTP ,14 , ConfRm1 ,
Ø
5
5 OUTP ,15 , Security2 ,
Ø
5
64 ROOM ,1
Ø
, ConfRm2 ,
Ø
1
List Presets LP ROOM# PRESET# NAME FOLLOW MODE
Example response for LP command ROOM# PRESET# NAME FOLLOW MODE
GL
Ø
1 ,DailyConfig ,ALL
GL 32 ,LunchConfig ,ALL
Ø
1
Ø
1 ,WkEndConfig ,NO
Ø
1
Ø
2 ,NightConfig ,ALL
1
Ø
1
Ø
,TestConfig ,NO
INFORMATION COMMANDS ASCII (HOST-SWITCHER) RESPONSE (SWITCHER-HOST)
Query Software Version Q/q Ver
Specific BME Q/q Ver
Example 4Q Ver 1.
ØØ
Example explanation: Query Firmware version of BME #4.
4Q or 4q is acceptable as ASCII command format.
Request Part Number N/n N6
Ø
-25x-iofr (Response = BME #
Ø
Part Number)
Specific BME
N/n N6
Ø
-25x-iofr
Note: x =
Ø
= Matrix 64
ØØ
Wideband, x = 1 = Matrix 32
ØØ
Wideband, x = 2 = Matrix 64
ØØ
Lo Res,
x = 3 = Matrix 32
ØØ
Lo Res, x = 4 = Matrix 64
ØØ
Sync, x = 5 = Matrix 32
ØØ
Sync, x = 6 = Audio.
io = Two character Input/Output Matrix configuration code (see Page B-1)
f = FPC-1
ØØØ
installed?
, Ø
= No, 1 = Yes. r = Redundant Power Supplies
installed?,
Ø
= No, 1 = Yes.
Request Information I/i I
X •T •U •M
X •Vmt •Amt •Sys •Dgn
Example I I64X64•T1•U2•M21X21•Vmt
Ø
•Amt1•Sys1•Dgn
ØØ
Example explanation: I64X64 indicates that this BME has 64 physical inputs and 64 physical outputs.
T1= Wideband Switcher, U2 indicates system has 2 BMEs and is set to M21X21 (21 Virtual Inputs and
21 Virtual Outputs). Vmt
Ø
= Video is not Muted, Amt1 = Audio is Muted. Sys1 indicates that this BME has
no redundant power supply and the main power supply is on. Dgn
ØØ
indicates no error (BME’s self-test
diagnostics passed. Dgn2
Ø
if reported = System physical size has changed since last virtualized.
Specific BME
I/i Same as Request Information Response above.
Notes:
1. Command “
Ø
I ” is equivalent to “I” or “i” command.
2.
1 = Wideband, 2 = Lo-Res, 3 = Sync, 4 = Audio (for this BME),
Ø
= BME not present.
3.
+ is physical size of this BME.
4.
, , , , are each two digit fields.
4-5