Filter
Top Products
20 DXP DVI Pro and DXP HDMI Series • Operation
3. To change a value, press and release the button that relates to the
desired value:
C O N T R O L
I / O
Press and release the buttons to configure the RS-232/RS-422 port as follows:
Baud rate:
Enter — 9600 Preset — 19200
View — 38400 Esc — 115200
Serial protocol:
Video — RS-232 Audio — RS-422
The selected buttons blink and the others remain lit.
In this example, the port is set to RS-422 at 38400 baud.
AUDIO
ESCVIEW
ENTER
PRESET
VIDEO
Figure 19. RS-232/RS-422 and Baud Rate Selection
4. Press and release an output button to exit the Serial Port
Configuration mode.