Filter
Top Products
34 DXP DVI Pro and DXP HDMI Series • Remote Control
3. Scroll to the Matrix Switchers Control Program and click Install.
Figure 21. Matrix Switchers Control Program Install Link
4. Follow the on-screen instructions. The installation program creates
a C:\Program Files\Extron\Matrix_Switchers directory and
an “Extron Electronics\Matrix Switchers” group folder. It installs
the following four programs:
• MATRIX Switcher + Control Program
• MATRIX Switcher + Help
• Uninstall MATRIX Switcher
• Check for Matrix Updates
Starting the Program
1. To run the Matrix Switcher program, click Start >
All Programs > Extron Electronics > Matrix Switchers >
MATRIX Switcher + Control Pgm. The Comm Port Selection
window appears.
Figure 22. Comm Port Selection Screen
2. Select the Comm (serial) port that is connected to the switcher or
select IP [LAN].
3. If you selected a Comm port, check the baud rate (shown in green
above the ports list). If you need to change it, click the Baud
button and double-click the desired baud rate option on the
drop-down menu that opens.