Filter
Top Products
DVS 510 Series • Remote Configuration and Control 64
Command
ASCII Command
(Host to Scaler)
Response
(Scaler to Host)
Additional Description
Advanced Configuration (continued)
Front Panel Security Lockout (Executive Mode)
Set mode 1
1 X
Exe 1 ]
Lock all front panel functions.
Set mode 2
2 X
Exe 2 ]
Allow limited adjustments to be made
from the front panel (input switching, PIP,
volume control, and Auto-Image).
Disable
0 X
Exe 0 ]
Allow all front panel adjustments.
View status
X
X5( ]
Show current lock mode status.
Input Aspect Ratio
Set to Fill
E 1 ASPR } Aspr 1 ]
Set the input to always fill the entire
output raster (default).
Set to Follow
E 2 ASPR } Aspr 1 ]
Display the input with its native aspect
ratio.
View aspect ratio
E ASPR } Aspr X3( ]
View the current aspect ratio setting.
Overscan Mode
NOTE: Overscan mode applies only to SMPTE input rates (NTSC, PAL, 480p, 576p, 720p, 1080i, and 1080p).
Set value
E X# * X3* OSCN } Oscn X# * X3* ] Set input signal type X# to overscan
mode X3*.
View status
E X# OSCN } Oscn X# * X3* ] Show overscan status for input type X#.
HDCP Notification
Enable HDCP
notification
E N 1 HDCP } Hdcp N 1 ]
Enable HDCP notication (default). A
full-screen green signal and an on-screen
message are displayed when an HDCP
compliant source is switched to a
non-compliant display.
Disable notification
E N 0 HDCP } Hdcp N 0 ]
Disable HDCP notication; mute output
instead.
View notication status
E N HDCP } X1) ]
View HDCP notication status
NOTE: X# = Input signal type 1 = RGB, 2 = YUVp/HDTV, 3 = RGBcvS, 4 = YUVi, 5 = S-video,
6 = Composite, 7 = DVI
X1) = HDCP notification status 0 = disabled, 1 = enabled
X3* = Overscan setting
0 = 0.0% (default for RGB and DVI). A true Auto-Image is executed on
SMPTE inputs.
1 = 2.5% (default for YUVp/HDTV). An Auto-Image command snaps to
a 2.5% table.
2 = 5.0% (default for composite, S-video, YUVi, and RGBcvS). An
Auto-Image command snaps to a 5.0% table.
X3( = Aspect ratio 1 = Fill: each input rate fills the entire output raster (default).
2 = Follow: each input rate is displayed with its native aspect ratio.
X5( = Front panel lock (executive mode) 0 = executive mode disabled, 1 = full front panel lockout,
2 = Partial front panel lockout (Only input selection, PIP, volume control,
and Auto-Image are available.)