Filter
Top Products
DVS 510 Series • Remote Configuration and Control 69
X10%
= Event buffer 0 = receive
1 = unified
2 = data
3 = NVRAM
X10^
= Event buffer offset 0 through maximum buffer size
X10&
= Event data size b = bit
B = byte (8 bits)
S = short (16 bits)
L = long (32 bits)
NOTE: In a write operation, this parameter can optionally be preceded by A (for and) or O (for
or) to logically combine with content instead of replacing it.
X10*
= Event data to write
X10(
= Reading password If a password exists, the unit responds with the
password (RS-232 connection) or 4 asterisks (****) (IP
connection). If there is no password, the response is
empty.
X11)
= Number of bytes to read 1 through 127
X11%
= Default unit name Combination of the model name and the last three
pairs of the unit MAC address (for example,
DVS-510-SA-05-62-3D)
X11*
= Security level of connection 0 = anonymous
01–10 = extended security levels
11 = user
12 = administrator
X12)
= ASCII digits representing numeric Leading zeros are suppressed.
value of data element read from
event buffer.
X12%
= Broadcast repetition rate in seconds 0 through 255
Default = 0 (clear)
(The response is returned with leading zeros.)
X12&
= Threshold settings for all ports 0 = none
1 = full
2 = standby and full
X12(
= Number of seconds before IP 1 through 65000
connection timeout Default = 30 = 300 seconds
X13# = Hardware (MAC) address with
the 4 most significant hex
nibbles converted into a single
16-bit decimal number.
X13$ = Hardware (MAC) address with Can be up to 10 digits.
the 8 least significant hex
nibbles converted into a single
32-bit decimal number.