Extron electronic IPI 200 Switch User Manual


  Open as PDF
of 86
 
IPI 100 and IPI 200 Series • Operation
3-2
Operation
Front Pane Features and Operation
a
Speaker—ThisintegratedspeakerprovidesmonooutputattheIPIpanel.
b
Mic On LED—ThisLEDlightsundertwocircumstances:
• WhenaconguredPushtoTalkbuttonispressed.
• Toindicatethatsomeoneatthehelpdeskconsoleislisteningandthatthe
intercomisinmonitoringmode.Monitoringmodepermitshands‑free
operation: the user does not have to press the Push to Talk button to speak into
the intercom. It also lets help desk staff monitor what is happening to
determine whether to send security personnel to that room.
c
Microphone—Pushoneofthebutttonsandtalk.Themicrophoneisbehindthis
opening.
d
Level switch—Thisthree‑positionswitchletsyouchangethe
speaker’sloudnesslevel(IPI100series,only).
e
Push to Talk button(s)—TheIPI101AAPandIPI201unitsinclude
oneofthesebuttons,andtheIPI104AAPandIPI204unitshave
four.
N
The MLC and IPI intercoms must be configured (via software) to associate
each button with the IP address of a specific console PC or intercoms. Once
configured, the IPI 101 AAP and IPI 201 can communicate to one location (one
IP address). The IPI 104 AAP and IPI 204 can communicate with up to four
different locations.
f
Config Port (IPI 200 Series only)—This2.5mmportisusedtocongurethe
IPI201andIPI204andtouploadrmwarewhennecessary.
LEVEL
HIGH
MED
LOW
 previous next