Filter
Top Products
IPL T SF Series Interfaces • Software Setup
Software Setup, cont’d
3-6
With the Add Device dialog box open:
1
. Select an IPL T SF24 or IPL T SFI244 from the drop-down
list.
2
. Enter an IP address in the Name/IP Address eld (or leave
the default address).
3. Enter a unique display name.
4. Click Make this device a GlobalViewer Host (if desired).
5. Click the Advanced button. This opens additional Add
Device screen options and changes the Advanced button
to read Basic. (If you wish to return to the basic screen
options, simply click the Basic button.)
6. If the device you are adding is password protected, enter
the appropriate Admin and User passwords. (The default
condition is no Admin or User password).
7. Check Auto Configure IP Address.
8. Enter the device’s MAC address (found on a label on the
rear of the device).