Filter
Top Products
Loading Paper
QMS 4525 Print System User's Guide4-8
9 Check if the paper fits
exactly between the left
and right closure plates.
If not, adjust the paper
alignment by squeezing
together the green levers
underneath the bin, and
then sliding them to the
left so the right closure
plate clicks into place
against the paper stack.
10 If you are loading paper
in the upper bin, ensure
that the paper-weight
adjustment switch set-
ting matches the weight
of the new paper.
Usually, paper weight is
listed on the paper wrap-
per.
The switch must be in the upward position if the paper weight
is 16 to 27 lbs (60 to 102 g/m
2
).
The switch must be in the downward position if the paper
weight is 28 to 32 lbs (105 to 120 g/m
2
).
11 Press the Up button of the refilled input bin.
1RWH,IDQLQ
S
XWE LQLV OHIWLQWK HGRZQ
S
RVLWLRQWKHPHV VD JH
LOAD UPPER TRAY
XXX
PAPER
continues to display.